|
PIPE-BENDING MACHINE ÒÃÑÂ-1-ÒÌ (Brief technical description) 1. APPLICATION Pipe-bending machine, type ÒÃÑÂ-1-ÌÒ is purposed for bending with induction heating of steel pipes with diameter 57-273mm without filling. Additionally it can be used for heat-treatment of steel and copper pipes, before their bending by means of cold bending machines. Pipe bending machine provides bending of pipes in stationary conditions at ambient temperature +5°C - +40°C and at relative humidity not exceeding 80%.  2. MAIN TECHNICAL DATA AND CHARACTERISTICS | ¹ | Parameter definition | Rate | | 1 | Power consumption, Kw | 140 | | 2 | 3 phase AC power supply, V | 380 | | 3 | Power of high frequency generator, Kw | 100 | | 4 | Generator frequency, Hz | 2400 | | 5 | Voltage of high frequency generator, V | 400, 800 | | 6 | Outer diameter of pipes under bending, mm
- minimum
- maximum |
57
273
| | 7 | Pipe wall thickness, mm:
- minimum
- maximum |
3,0
12,0
| | 8 | Pipe delivery speed range, mm/sec | 0,44 - 4,4 | | 9 | Distance from indicator to bending roller, mm
- minimum
- maximum |
50
670
| | 10 | Bending radius:
- minimum
- maximum |
1,5 ìì
not limited
| | 11 | Maximum bending angle, degree | 240 | | 12 | Minimum distance between adjacent cambers, mm | 50 | | 13 | Fresh water consumption, l/min | 70 | | 14 | Distilled water consumption, t/year | 3 | 
3. OVERALL DIMENSIONS AND WEIGHT OF EQUIPMENT, INCLUDED INTO ASSEMBLY AND DELIVERY COMPLEMENT | ¹ | Equipment definition | Length, width, height, mm | Weight, kg | Quantity | | 1 | Pipe bending machine | 2130õ5500õ1500 | 4535 | 1 | | 2 | Front support | 1920õ800õ920 | 150 | 1 | | 3 | Back support | 1050õ750õ850 | 42 | 1 | | 4 | Converter cooling system | 700õ600õ190 | 180 | 1 | | 5 | Power box | 560õ1200õ1890 | 500 | 1 | | 6 | Control box | 600õ1000õ1990 | 200 | 1 | | 7 | Tank | 1400õ2000õ1200 | 413 | 1 | | 8 | Frequency converter | 850õ1615õ1550 | 2240 | 1 | | 9 | Pump 1 ½ Kw | 435õ200õ200 | 32 | 2 | | 10 | Control panel | 850õ685õ1200 | 120 | 1 | Delivery complement includes also spare parts, tools and fittings in compliance with ÒÓ 5.978-13388-82-16, and operational documentation as well. Development of construction project, installation, putting into operation and setting of pipe-bending machine shall be performed depending on concrete conditions. Frequency converter should be mounted in separate room, with purpose of noise reduction. 
|
ÐÀäóãà