 |
Pipe-Bending |
Machine 1MT |
| This type of bending machine is used to bend steel pipes (diameter 57-287 mm, without filling) by high-frequency current heating. This machine can also be used to anneal both steel and copper pipes before bending with a cold bending machine. This heat-bending unit is intended for stationary operation at temperatures of +5...+40 degrees C and at relative humidity no greater than 80%. |
GENERAL TECHNICAL DATA
| item | Parameter | Norm |
| 1. | Capacity, kW | 150 |
| 2. | Input volume, V | 380 +10 -15% |
| 3. | Power of generator, kW | 120 |
| 4. | Frequency of generator, Hz | 1000-4000 |
| 5. | Volume of high-frequency generator, V | 400, 800 |
| 6. | External pipe diameters, mm | |
| minimum | 57 | |
| maximum | 273 | |
| 7. | Pipe thicknesses, mm | |
| minimum | 3 | |
| maximum | 12 | |
| 8. | Feed speed of pipe, adjusting range, m/sec | 0,44...4,4 |
| 9. | Distance from indicator of heating to bending roller, mm | |
| minimum | 54 | |
| maximum | 670 | |
| 10. | Radius of the bend, D | |
| minimum | 1,5 | |
| maximum | unlimited | |
| 11. | Maximum bend, deg | 220 |
| 12. | Minimum distance between adjacent bends, mm | 50 |
| 13. | Fresh water consumption, litres/minute | 70 |
| 14. | Distilled water consumption, tonnes/year | 4 |
| 15. | Occupied area, cubic metres | 60 |
SIZE AND WEIGHT OF THE UNIT
| N | Items | Length, Width, Height, mm | Weight, kg | Quantity |
| 1. | Pipe-bending machine | 5130x2130x1188 | 5500 | 1 |
| 2. | Front support | 2400x900x850 | 150 | 1 |
| 3. | Back support | 600x200x950 | 42 | 1 |
| 4. | Wire box | 600x1000x2265 | 200 | 1 |
| 5. | Control box | 600x1000x2265 | 180 | 1 |
| 6. | Tank | 1400x2000x1200 | 413 | 1 |
| 7. | Frequency transformer | 1500x1000x2200 | 1780 | 1 |
| 8. | Pump | 435x200x200 | 32 | 1 |
| 9. | Control panel | 650x500x1081 | 60 | 1 |
| Technical documents are shipped with the machine. Assembly, installation, operation, and adjustment of this pipe-bending machine is fulfilled. |
Home page |
Russian WEB-page |
Address |