|
|
|
|
Main subdivisions:
|
|
Docking complex production
|
- complete range of docking works,
- repair of sea connections, rudder-propeller group,
- abrasive cleaning and painting of vessels hulls, holds, holds and tanks covers, painting of rooms.
|
|
Hull shop
|
- repair of hatch covers, covers of tanks, hull,
- manufacture of hull fittings,
- manufacture of welded steel structures,
- manufacture of assembled steel structures,
- shipbuilding
|
|
Detection group
|
- measurement of permanent thickness in accordance with Classification societies requirements,
- issuance (preparation) of report on permanent thickness measurements in compliance with IACS requirements,
- preparation of repair specification for hull structures and hatch covers with sketches of sections subject to renewal and schemes of repair,
-preparation of repair process technology and sequence of steel structures renewal,
- supervision over repair process including control of volumes and quality of work performed
|
|
Grabs production
|
- manufacture of over 60 models of grabs,
- manufacture of steel structures of different type,
- production of billets for shiprepair and shipbuilding
|
|
Shiprepair shop
|
- repair of boilers and heat-exchangers; renewal of pipelines of all ship systems, including / excluding galvanizing; repair /manufacture of fittings, hull, tanks; manufacture of steel structures of different types,
- insulation works,
- shipbuilding
|
|
Built-up welding section
|
restoration of parts by electric arc and plasma-powder welding with flux as well as in protective gases atmosphere (argon, carbonic acid gas, hardness ranges from 20 to 60Hp):
piston heads of main engines MAN, SULZER, "ÄÊÐÍ"; exhaust valves of main diesels "ÄÊÐÍ"; pins and levers of valve driven; cylinder head covers; valve seats; tail shafts and intermediate shafts; rudderstocks, pintles; Simplex type stern-tube sealing liners
|
|
Electric fitting shop
|
Repair of ship electrical equipment and radio-navigation equipment. Repair of electrical engines and generators. Repair of FO devices. Manufacture of coils for electromagnetic crane brakes of ÒÊÏ type
|
|
Machine shop
|
- repair of main and auxiliary engines, boiler fittings, pumps, compressors, refrigeration plants, etc
- repair of deck machinery of all types,
- repair and manufacture of valves, gate valves, slide valves, etc,
- balancing of generators rotors and turbines,
- repair of rudder-propeller group,
- centering of mechanisms,
- machining of parts on universal turning laths billets D max 300mm 600mm,
- on milling machines for billets with dimensions: 850õ250mm, Í =300mm,
m upto 0,8 tons,
- on vertical lathes for billets with dimensions D max =2800 mm,
Í =1500, m upto 12 tons,
- on boring machines for billets with maximum dimensions 1200õ1200 mm,
Í =1250 mm, m upto 12 tons,
- on screw-cutting lathes with D max 800 mm and L max 12000 mm,
m upto 18 tons,
- work on turning specialized lathes with digital programmed control
D max 300 mm, m upto 80 kgs
|
|
Foundry/forge production
|
Castings made of cast iron and non-ferrous metals
Forgings made of carbon and alloyed steel, manufactured by means of free forging and in dies on pneumatic hammers with falling parts weight 50-1000kg and on steam hammer with falling parts weight 2000 kg
Thermal treatment of shafts, gears, rollers, axis made of steel with grades 45, 40Õ,
40 ÕÍ, and other alloyed steel. Shafts
D max - 200 mm and Lmax 1300 mm. Rollers D max - 600 mm and m not over 120 kg
Carburizing with further hardening of liners parts, pins and other parts with dimensions not over 500 õ 500 and m not exceeding 50 kg, High-frequency current for shafts
D max 120mm and Lmax 400 mm
Thermal treatment of various tools made of tool steel, dies, t 0 C of heating for hardening is not over 1000 0 Ñ and m not over 120 kg.
Annealing in gas furnace of parts with dimensions not over 2,5 õ 1,2 m and m not over 1t
|
|
Wood worker’s shop
|
Manufacture of fastenings for cargo, ship’s furniture, stagings of any type, consumer goods
|
|
Transportation /rigging shop
|
Rigging operations of any type during shiprepair process. Transshipment of outsize cargoes upto 160 t. Handling operations in port regime. Mooring operations with help of tugs within water area.
|
|
Subsidiary subdivisions:
|
|
Tools production and equipment repair
|
Machining, including teeth cutting of gears and shafts up to module 8. Equipment repair, construction works, manufacture of metal –cutting tools. Manufacture of pipe-bending machines.
|
|
Power engineering shop
|
Maintenance of power nets, oxygen station, boiler room, compressor room, water-supply and fire-fighting system
|
|
Apprenticeship training
|
Preparation and teaching of the workers of basic specialties. Assistance during production procedure
|
|
Yard laboratories
|
Chemical, mechanic, X-ray laboratories. Perform testings necessary for production procedure
|
|
Garage
|
Carriage by cargo and passenger transport means. It possesses two car cranes with lifting capacity 8 and 16 tons.
|
|
|
|
|
|
|
|
|